Enable/disable the storage of the last used acoustic pedestrian protection setting.
Enable/disable the acoustical confirmation when the car is locked/unlocked.
Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. To make this work, the car has to be equipped with an alarm system.
The duration of the confirmation sound that is played when locking/unlocking the car.
The volume of the confirmation sound that is played when locking/unlocking the car.
The default distance level of the Active Cruise Control on activation.
Deactivate the Active Sound Design. Use a backup to revert this coding once it has been applied.
Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.
Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.
Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.
The alarm sound that is played when the alarm is triggered.
Enable/disable the decoupling of the brightness of the ambient lighting from the brightness of the instrument cluster.
The brightness of the angel eyes with low beam or parking lights. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.
The brightness of the angel eyes with low beam.
The brightness of the angel eyes with parking lights.
The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.
The ringtone that is used in case of an incoming call.
Enable/disable the automatic shut-off of the iDrive system when the driver door is opened.
The warning chime that sounds when a warning is displayed in the car.
Enable/disable the automatic activation of the Auto Start Stop function in ECO mode.
Save the last used Auto Start Stop function setting for the next start of the car.
Set the Auto Start Stop function to off by default when the car is started.
The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.
The brake deceleration at which the Brake Force Display is activated.
The speed at which the Brake Force Display is activated.
Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded. To trigger convenient closing the lock button on the remote control has to be pressed and held.
The delay for the convenient closing before the windows are closed.
The delay at which the front windows are closed during convenient closing.
The delay as of with the sunroof is closed during convenient closing.
Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface.
Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held.
Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.
The delay for the convenient opening before the windows are opened.
The delay at which the rear windows are opened during convenient opening.
The delay as of with the sunroof is opened during convenient opening.
Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.
Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.
The daytime running light mode.
Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.
Enable/disable the rear view camera zoom to the trailer hitch.
The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.
The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.
Enable/disable the volume popup that is displayed when the volume is changed.
Enable/disabled the additional digital speed display in speedometer.
The average speed and consumption is reset after the set time automatically.
Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the indicator lever until the specific display appears.
Enable/disable the empty menu item in the board computer.
The model-specific M Performance logo that is displayed in the bottom right in the instrument cluster.
The logo that is displayed in the center of the screen during the start-up of the instrument cluster.
The road sign type of the “Speed Limit Info”. Please note that the car has to be equipped with the “Speed Limit Info” by factory.
Enable/disable the horn signal that sounds when locking the car with the engine running.
The car is locked automatically again if it has been unlocked and no door has been opened within the set time.
Enable/disable the automatic unlock of the doors when the ignition is turned off.
Enable/disable the window lifter interruption when a door is opened.
Enable/disable the road edge warning of the lane departure warning.
The default driving mode on start-up.
Enable the driving mode memory. The last used driving mode is stored when the car is turned off and restored on the next start-up. Use a backup to revert this coding once it has been applied.
The remaining range at which the permanent low fuel warning is displayed.
The remaining range at which the temporary low fuel warning is displayed.
Enable/disable the indicators in the HUD. Please note that “HUD indicators (2 of 2)” in the “Headunit” control unit has to be enabled additionally. This function is not supported, if the car is equipped with a fully digital instrument cluster.
Enable/disable the indicators in the HUD. Please note that “HUD indicators (1 of 2)” in the “Instrument Cluster” control unit has to be enabled additionally. It may also be necessary to enable the corresponding checkbox in the HUD settings in the iDrive system in the car. This function is not supported, if the car is equipped with a fully digital instrument cluster.
Enable/disable music lists in the HUD.
Enable/disable the telephone book in the HUD.
Enable/disable the telephone list in the HUD.
Enabled/disable voice input display in the HUD.
The blocking time between headlight cleaning activations.
The pause between the injection pulses of the headlight cleaning system.
The deactivation speed threshold at which the headlight cleaning system is deactivated.
Activate/deactivate the headlight washers.
The number of washing operations at which the headlight cleaning is turned on.
The number of water injection pulses during headlight cleaning.
The duration of the water injection pulses of the headlight cleaning system.
Number of indicator flashes when locking the car.
Number of indicator flashes when unlocking the car.
Enable/disable the automatic activation of the lights in the door handles when the reverse gear is engaged.
Enable/disable the automatic switch-off of the fog lights when the high beam is turned on.
Allows the fog lights to be turned on with parking lights.
The hazard warning signal is activated automatically after an emergency braking.
The sensitivity of the rain-light-sensor that affects the automatic wiper and light activation.
Disable the sidemarkers in US cars. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.
Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. For this function to work, the car has to be equipped with power folding mirrors. Make sure the button in the door for selecting the mirror is set to the driver side also.
The tilt value of the right mirror, when the reverse gear is engaged.
Enable/disable the folding of the mirrors when using convenient closing.
The mirrors are folded automatically when the car is locked with the remote control or Comfort Access and unfolded again when the car is unlocked. Please note that your car has to be equipped with power folding mirrors for this option to work. Use a backup to revert this coding once it has been applied.
The maximum speed at which the mirrors can be folded.
The speed at which the mirrors are unfolded automatically.
Enable/disable the unfolding of the mirrors when using convenient opening.
Enable/disable the automatic activation of the PDC when the car starts rolling backwards.
The driven distance after the PDC is turned off automatically.
The speed at which the PDC is turned off automatically.
The driven distance after the rear view camera is turned off automatically.
The speed at which the rear view camera is turned off automatically.
The temperature of the front backrests for seat heating level 1.
The temperature of the front backrests for seat heating level 2.
The temperature of the front backrests for seat heating level 3.
The temperature of the front seats for seat heating level 1.
The temperature of the front seats for seat heating level 2.
The temperature of the front seats for seat heating level 3.
The temperature of the rear backrests for seat heating level 1.
The temperature of the rear backrests for seat heating level 2.
The temperature of the rear backrests for seat heating level 3.
The temperature of the rear seats for seat heating level 1.
The temperature of the rear seats for seat heating level 2.
The temperature of the rear seats for seat heating level 3.
The memory duration of the seat heating/cooling settings.
Activate/deactivate the initial acoustic seat belt reminder after the car is started.
Activate/deactivate the seat belt indicator in the instrument cluster for the driver seat.
Activate/deactivate the seat belt indicator in the instrument cluster for the passenger seat.
Activate/deactivate the seat belt indicator in the instrument cluster for the rear seats.
Driven distance at which th seat belt reminder is activated.
Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.
Duration at which the seat belt reminder stays active.
Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.
Speed at which th seat belt reminder is activated.
The speed at which the side view camera can be activated.
The speed at which the side view camera is deactivated.
Enable/disable the Sport Displays in the iDrive system. Please note that the Sport Displays are not working in all cars, depending on the engine.
The color of the Sport Displays in the iDrive system.
The delay when opening the boot lid with the remote control. This value can be increased to prevent accidental openings of the boot lid.
Enable/disable closing the tailgate with the button in the storage compartment in the driver door.
Enable/disable the closing of the tailgate with the button in the storage compartment in the driver door without a long press.
Enable/disable closing of the tailgate with the remote control.
Enable/disable closing the tailgate with the remote control without a long press.
Enable/disable closing the tailgate without a long press of the button on the remote control.
The tailgate function that is triggered when the button on the remote is pressed.
The tailgate function that is triggered when the button in the storage compartment in the driver door is pulled up.
The tailgate function that is triggered when the button in the storage compartment in the driver door is pushed down.
Enable/disable the Sport Automatic Transmission.
Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a backup to revert this coding once it has been applied.
Activate video in motion. Use a backup to revert this coding once it has been applied.
Enable video in motion. Please note the instructions displayed after coding.
Enable video playback from USB storage media. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when using one of the cameras. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when using the night vision camera. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when the iDrive system is started. Use a backup to revert this coding once it has been applied.
The position of the light switch at which the Welcome Light is activated.
Enable/disable the activation of the Welcome light in darkness only.
The lighting duration of the Welcome Light.
The brake lights are turned on with the Welcome lights.
The central indicators are turned on with the Welcome lights.
The daytime running light is turned on with the Welcome lights.
The design lights are turned on with the Welcome lights.
The fog lights are turned on with the Welcome lights.
The front indicators are turned on with the Welcome lights.
The high beam is turned on with the Welcome lights.
The front indicators are turned on with the Welcome lights.
The inner rear parking lights are turned on with the Welcome lights.
The license plate lights are turned on with the Welcome lights.
The low beam is turned on with the Welcome lights.
The outer rear parking lights are turned on with the Welcome lights.
The front parking lights are turned on with the Welcome lights.
The left rear fog light is turned on with the Welcome lights.
The right rear fog light is turned on with the Welcome lights.
The left reversing light is turned on with the Welcome lights.
The right reversing light is turned on with the Welcome lights.
The third brake light is turned on with the Welcome lights.
Enable/disable the completion of the wiper cycle when the car is turned off.
The number of wipe cycles after front washing
The number of wipe cycles after rear washing.
Enable/disable the automatic switch back of the wiper level when the car becomes stationary.