Enable/disable the acoustical confirmation when the car is locked/unlocked.
Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. To make this work, the car has to be equipped with an alarm system.
The duration of the confirmation sound that is played when locking/unlocking the car.
The frequency of the confirmation sound that is played when locking/unlocking the car.
The volume of the confirmation sound that is played when locking/unlocking the car.
The default distance level of the Active Cruise Control on activation.
The speed at which the Active Rear Spoiler is extended.
The speed at which the Active Rear Spoiler is retracted.
Deactivate the Active Sound Design. Use a backup to revert this coding once it has been applied.
Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.
Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.
Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.
The alarm sound that is played when the alarm is triggered.
The brightness of the ambient lighting.
The brightness of the angel eyes with low beam or parking lights. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.
The brightness of the angel eyes with low beam.
The brightness of the angel eyes with low beam. Please note that this coding has to be carried out for both headlights (left and right) separately.
The brightness of the angel eyes with parking lights. Please note that this coding has to be carried out for both headlights (left and right) separately.
The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.
The ringtone that is used in case of an incoming call.
The ringtone that is used in case of an incoming call.
Enable/disable the automatic shut-off of the iDrive system when the driver door is opened.
The warning chime that sounds when a warning is displayed in the car.
Save the last used Auto Start Stop function setting for the next start of the car.
Set the Auto Start Stop function to off by default when the car is started.
The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.
The brake deceleration at which the Brake Force Display is activated.
The speed at which the Brake Force Display is activated.
The flashing frequency of the Brake Force Display.
The type of the Brake Force Display. The Brake Force Display is activated during hard braking to warn the following traffic.
Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded. To trigger convenient closing the lock button on the remote control has to be pressed and held.
The delay for the convenient closing before the windows are closed.
The delay at which the front windows are closed during convenient closing.
The delay as of with the sunroof is closed during convenient closing.
Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface.
Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held.
Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.
The delay at which the rear windows are opened during convenient opening.
The delay as of with the sunroof is opened during convenient opening.
Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.
Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.
The brightness of the daytime running light.
The mode of the daytime running light.
Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.
Enable/disable the pressure and temperature in the tyre pressure monitor in the iDrive system. Please note that the car has to be equipped with the required sensors. This option affects the display only and it is not possible to completely deactivate the tire pressure monitoring in the car.
Enable/disable the rear view camera zoom to the trailer hitch.
The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.
The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.
Enable/disable the volume popup that is displayed when the volume is changed.
Enable/disabled the additional digital speed display in speedometer.
The average speed and consumption is reset after the set time automatically.
Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the indicator lever until the specific display appears.
Enable/disable the empty menu item in the board computer.
The model-specific M Performance logo that is displayed in the bottom right in the instrument cluster.
The logo that is displayed in the center of the screen during the start-up of the instrument cluster.
The road sign type of the “Speed Limit Info”. Please note that the car has to be equipped with the “Speed Limit Info” by factory.
Enable/disable the horn signal that sounds when locking the car with the engine running.
The doors are locked automatically when reaching the set speed.
The doors are unlocked automatically when the key is removed. Please note that this only works if the doors have been locked automatically before.
Enable/disable the window lifter interruption when a door is opened.
Enable/disable the road edge warning of the lane departure warning.
Enable/disable the ECO driving mode as default.
The remaining range at which the permanent low fuel warning is displayed.
The remaining range at which the temporary low fuel warning is displayed.
Enable/disable the indicators in the HUD. Please note that “HUD indicators (2 of 2)” in the “Headunit” control unit has to be enabled additionally. This function is not supported, if the car is equipped with a fully digital instrument cluster.
Enable/disable the indicators in the HUD. Please note that “HUD indicators (1 of 2)” in the “Instrument Cluster” control unit has to be enabled additionally. It may also be necessary to enable the corresponding checkbox in the HUD settings in the iDrive system in the car. This function is not supported, if the car is equipped with a fully digital instrument cluster.
Enable/disable music lists in the HUD.
Enable/disable the telephone book in the HUD.
Enable/disable the telephone list in the HUD.
Enabled/disable voice input display in the HUD.
The blocking time between headlight cleaning activations.
The pause between the injection pulses of the headlight cleaning system.
The deactivation speed threshold at which the headlight cleaning system is deactivated.
Activate/deactivate the headlight washers.
The number of washing operations at which the headlight cleaning is turned on.
The number of water injection pulses during headlight cleaning.
The duration of the water injection pulses of the headlight cleaning system.
The number of wipe cycles after front washing
The number of cycles of the one-touch indicator function.
Enable/disable the automatic switch-off of the fog lights when the high beam is turned on.
The hazard warning signal is activated automatically after an emergency braking.
Enable/disable the automatic activation of the high beam assistant.
The sensitivity of the rain-light-sensor that affects the automatic wiper and light activation.
Disable the sidemarkers in US cars. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.
Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. For this function to work, the car has to be equipped with power folding mirrors. Make sure the button in the door for selecting the mirror is set to the driver side also.
The tilt value of the right mirror, when the reverse gear is engaged.
Enable/disable the folding of the mirrors when using convenient closing.
The mirrors are folded automatically when the car is locked with the remote control or Comfort Access and unfolded again when the car is unlocked. Please note that your car has to be equipped with power folding mirrors. “Fold/unfold mirrors automatically (2 of 2)” in the “Footwell Module” control unit has to enabled additionally. Use a backup to revert this coding once it has been applied.
The mirrors are folded automatically when the car is locked with the remote control or Comfort Access and unfolded again when the car is unlocked. Please note that your car has to be equipped with power folding mirrors. “Fold/unfold mirrors automatically (1 of 2)” in the “Car Access System” control unit has to enabled additionally. Use a backup to revert this coding once it has been applied.
The maximum speed at which the mirrors can be folded.
The speed at which the mirrors are unfolded automatically.
Enable/disable the automatic activation of the PDC when the car starts rolling backwards.
The speed at which the PDC is turned off automatically.
The speed at which the rear view camera is turned off automatically.
Enable/disable the heating for a retrofitted steering wheel.
Enable/disable the paddles for a retrofitted steering wheel.
The temperature of the front backrests for seat heating level 1.
The temperature of the front backrests for seat heating level 2.
The temperature of the front backrests for seat heating level 3.
The temperature of the front seats for seat heating level 1.
The temperature of the front seats for seat heating level 2.
The temperature of the front seats for seat heating level 3.
The temperature of the rear backrests for seat heating level 1.
The temperature of the rear backrests for seat heating level 2.
The temperature of the rear backrests for seat heating level 3.
The temperature of the rear seats for seat heating level 1.
The temperature of the rear seats for seat heating level 2.
The temperature of the rear seats for seat heating level 3.
The memory duration of the seat heating/cooling settings.
Activate/deactivate the initial acoustic seat belt reminder after the car is started.
Activate/deactivate the seat belt indicator in the instrument cluster for the driver seat.
Activate/deactivate the seat belt indicator in the instrument cluster for the passenger seat.
Activate/deactivate the seat belt indicator in the instrument cluster for the rear seats.
Driven distance at which th seat belt reminder is activated.
Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.
Duration at which the seat belt reminder stays active.
Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.
Speed at which th seat belt reminder is activated.
The speed at which the side view camera can be activated.
The speed at which the side view camera is deactivated.
Enable/disable the Sport Displays in the iDrive system. Please note that the Sport Displays are not working in all cars, depending on the engine.
The color of the Sport Displays in the iDrive system.
Enable/disable closing the tailgate with the button in the storage compartment in the driver door.
Enable/disable closing of the tailgate with the remote control.
Enable/disable closing the tailgate with the remote control without a long press.
Enable/disable the Sport Automatic Transmission.
Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a backup to revert this coding once it has been applied.
Activate video in motion. Use a backup to revert this coding once it has been applied.
Enable video in motion. Please note the instructions displayed after coding.
Enable video playback from USB storage media. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when using one of the cameras. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when using the night vision camera. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when the iDrive system is started. Use a backup to revert this coding once it has been applied.
The position of the light switch at which the Welcome Light is activated.
The lighting duration of the Welcome Light.
The fog lights are turned on with the Welcome lights.
The high beam is turned on with the Welcome lights.
The license plate lights are turned on with the Welcome lights.
The low beam is turned on with the Welcome lights.
The sidemarkers are turned on with the Welcome lights.
The taillights are turned on with the Welcome lights.
Enable/disable the completion of the wiper cycle when the car is turned off.
The number of wipe cycles after rear washing.
Enable/disable the automatic switch back of the wiper level when the car becomes stationary.