Enable/disable the acoustical confirmation when the car is locked/unlocked.
Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. To make this work, the car has to be equipped with an alarm system.
Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.
Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.
Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.
The duration of the alarm.
The hazard flasher is turned on when the alarm is triggered.
The alarm sound that is played when the alarm is triggered.
The high beam is turned on when the alarm is triggered.
The brightness of the Angel Eyes when the parking light is turned on.
The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.
Save the last used Auto Start Stop function setting for the next start of the car.
The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.
Enable/disable the Check Control notification for the brake force display.
Enable/disable the Check Control notification for the brake light.
Enable/disable the Check Control notification for the fog lights.
Enable/disable the Check Control notification for the front parking lights.
Enable/disable the Check Control notification for the front turn signals.
Enable/disable the Check Control notification for the high beam.
Enable/disable the Check Control notification for the inner tail lights.
Enable/disable the Check Control notification for the interior lights.
Enable/disable the Check Control notification for the license plate lights.
Enable/disable the Check Control notification that is displayed when the driver door is opened and the lights are still turned on.
Enable/disable the Check Control notification for the low beam.
Enable/disable the Check Control notification for the outer tail lights.
Enable/disable the Check Control notification for the parking lights.
Enable/disable the Check Control notification for the rear left fog light.
Enable/disable the Check Control notification for the rear right fog light.
Enable/disable the Check Control notification for the rear turn signals.
Enable/disable the Check Control notification for the reversing lights.
Enable/disable the Check Control notification for the third brake light.
The coming home lights are turned off when the high beam lever is pulled a second time.
Enable/disable the Coming home lights.
The lighting duration of the lights when Coming home lights are activated.
Activate coming home lights by pushing the button to open the trunk on the remote control twice.
The lighting duration of the coming home lights is extended when the high beam lever is pulled a second time.
Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded. To trigger convenient closing the lock button on the remote control has to be pressed and held.
The delay for the convenient closing before the windows are closed.
The delay at which the front windows are closed during convenient closing.
The delay as of with the sunroof is closed during convenient closing.
Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface.
Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held.
Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.
The delay for the convenient opening before the windows are opened.
The delay at which the rear windows are opened during convenient opening.
The delay as of with the sunroof is opened during convenient opening.
Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.
The maximum speed at which opening and closing of the convertible top is possible while driving.
Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.
Use the Angel Eyes as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.
The brightness of the Angel Eyes when used as daytime running light.
Use the fog lights as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.
The brightness of the fog lights when used as daytime running light.
The brightness of the dimmed high beam when used as daytime running light.
Use the front indicators as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.
Use the inner rear lights as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.
Use the rear lights as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.
The brightness of the rear lights when used as daytime running light.
Use the side markers as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.
The lights that are used for the daytime running light.
Enable/disable the correction of the digital speedometer.
Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the indicator lever until the specific display appears.
Enable/disable the empty menu item in the board computer.
Enable/disable the speedometer correction.
The car is locked again automatically after it has been unlocked and no door has been opened.
If the car is unlocked pushing the unlock button on the remote control twice, the driver door window is lowered when the door is opened.
The doors are locked automatically when reaching the set speed.
The doors are locked automatically when the ignition is turned on.
Open the rear window instead of the trunk with the button in the footwell.
Open the rear window instead of the trunk lid with the button outside.
Open the rear window instead of the trunk lid with the remote control.
Only the driver door is opened when the unlock button on the remote control is pressed once. When the button is pressed a second time all doors are unlocked.
The doors are unlocked automatically when the key is removed. Please note that this only works if the doors have been locked automatically before.
Enable/disable the window lifter interruption when a door is opened.
Enable/disable the interruption of the window lifters when the engine is started.
The window lifters are deactivated after the time set after the ignition has been turned off.
The window lifters are deactivated after the ignition is turned off and the driver door is opened.
Enable/disable the flasher using bi-xenon.
Turn of the fog light automatically as long as the flasher is activated.
The remaining range at which the range warning is activated.
The remaining fuel at which the reserve warning is activated.
The blocking time between headlight cleaning activations.
The pause between the injection pulses of the headlight cleaning system.
Activate/deactivate the headlight washers.
The number of washing operations at which the headlight cleaning is turned on.
The number of water injection pulses during headlight cleaning.
The duration of the water injection pulses of the headlight cleaning system.
Enable/disable the double pulse hazard flasher.
Enable/disable the flashing when the car is locked.
Enable/disable the flashing when the car is unlocked.
The duration of the one-touch signal.
The interior lighting is faded in/out.
Turn off interior lighting after two minutes automatically.
Enable/disable the Comfort Start function. With Comfort Start enabled the START-STOP button has to be pushed briefly only once to start the engine.
Enable/disable the ejection of the key when start-stop button is pressed and held.
Enable/disable the corner LEDs.
The brightness of the corner LEDs when the high beam is turned on.
The brightness of the corner LEDs when the low beam is turned on.
The fog lights are turned off automatically when the high beam is activated.
The interior lighting is turned on when the button to lock the car on the remote control is pressed after it has been locked.
The brightness of the parking light.
The brightness of the parking light with the high beam turned on.
The brightness of the parking light with the low beam turned on.
Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. Please note that the car has to be equipped with power folding mirrors and additionally the mirrors have to be connected to the LIN bus in the car. This is the case only if the car is equipped with special features. Make sure the button in the door for selecting the mirror is set to the driver side also.
Enable/disable mirror folding with convenient closing. Please note that the car has to be equipped with power folding mirrors and additionally the mirrors have to be connected to the LIN bus in the car. This is the case only if the car is equipped with special features.
The vehicle orientation in the PDC display.
Trigger the panic alarm when the button to open the trunk on the remote control is pressed and held. Please note that this requires additional options to be activated in the “Car Access System” if necessary.
The duration that the button to open the trunk on the remote control has to be pressed until the panic alarm is triggered.
The panic alarm duration if it is not cancelled using the remote control.
The panic alarm is triggered when the button to open the trunk on the remote control is pressed and held. Please note that the car has to be equipped with an alarm system and the “Panic alarm” option in the “Anti-theft alarm system” control unit has to be enabled also.
Activate/deactivate the initial acoustic seat belt reminder after the car is started.
Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.
Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.
Enable/disable the driver seatbelt feeder.
Enable/disable the passenger seatbelt feeder.
Enable/disable the alarm system with the remote control or a key. For theft prevention it may be beneficial to allow deactivation of the alarm system with the remote control only.
Disable the Comfort Access for theft prevention. Please note that this requires the key to be inserted to start the engine. Use a backup to revert this coding once it has been applied.
The brightness of the US sidemarkers.
The brightness of the US sidemarkers.
Enable/disable the US style sidemarkers using the indicators or separate lights.
Activate video in motion. Use a backup to revert this coding once it has been applied.
Disable the warning that is displayed when using one of the cameras. Use a backup to revert this coding once it has been applied.
Enable/disable the ignition key warning
Disable the warning that is displayed when using the night vision camera. Use a backup to revert this coding once it has been applied.
A warning is displayed if the set speed limit is exceeded.
Enable/disable the temperature warning.
Disable the warning that is displayed when the iDrive system is started. Use a backup to revert this coding once it has been applied.
The lighting duration of the Welcome Light.
Enable/disable the Welcome lights.
The brake lights are turned on with the Welcome lights.
The fog lights are turned on with the Welcome lights.
The front indicators are turned on with the Welcome lights.
The high beam is turned on with the Welcome lights.
The front indicators are turned on with the Welcome lights.
The license plate lights are turned on with the Welcome lights.
The low beam is turned on with the Welcome lights.
The front parking lights are turned on with the Welcome lights.
The rear parking lights are turned on with the Welcome lights.
The rear fog light is turned on with the Welcome lights.
The sidemarkers are turned on with the Welcome lights.
The third brake light is turned on with the Welcome lights.
Enable/disable the automatic rear wiper activation when reverse gear is engaged.
Enable/disable the completion of the wiper cycle when the car is turned off.
The delay between the spraying of the front window and the cleaning afterwards.
The front wiper interval when the car is standing still.
The delay between the spraying of the rear window and the cleaning afterwards.
The rear wiper interval.
The number of wipe cycles after front washing
The number of wipe cycles after rear washing.
Enable/disable the automatic switch back of the wiper level when the car becomes stationary.